Majacraft bobbin

3D printed bobbin. The high-speed whirling pattern gives a boost to your spinning.

This is compatible with With Majacraft's Little Gem, Pioneer, Rose, Suzie and Suzie Professional.

The tube is a transparent acrylic tube with an outer diameter of 16 mm. The hole in the ends of the roll is 8 mm in diameter. There is no hole in the tube, it is perfectly smooth, but if the surface feels slippery, you can sand it down with sandpaper.

The diameter of the ends of the roll is 8.8cm and the length of the roll is about 11.5 cm.

 

The colour tones may look slightly different, depending on the screen.

 

You can read about 3D printed bobbin experiences on Eija's blog: https://pelkkablogi.wordpress.com/2022/04/18/rullia-rukkiin/

Do not use fishing line or metallic string with 3D printed bobbins, they will wear out the plastic. Use cotton string instead.

Bobbins are printed on order, I pack orders within 1-3 days of order.

Material PLA plastic. PLA softens at temperatures above 60 degrees Celsius. PLA is an environmentally friendly plastic made mainly from plant-based materials such as corn.