A cog for card making (7,5 cm)

Cogs of different sizes that can be used for card making, bujo or even as accessories in steampunk-themed accessories.

 

The set includes four different cogs , all the same size. Diameter 7.5 cm, thickness 2 mm. The diameter is measured to the outer edge of the rim, this is where the differently sized spikes / spikes come in. The first picture shows the whole set, with medium sized spikes/teeth.

 

1: short spikes

2: medium spikes

3: long spikes

 

Kuvissa akryylimaalattuja rattaita, viimeisenä spraymaalilla maalattu tuote. Kaikkien materiaalina sama harmaa PLA-muovi.

 

The material is PLA plastic, which can be painted with ordinary acrylic paints, or spray paint. You should apply several thin coats of acrylic paint, allowing the coats to dry, so that you get an opaque finish. If the paint doesn't stick, you should wash the wheel, for example with dishwashing liquid, to remove any grease that may have stuck to the surface from your fingers.

You can gently sand the painted surface with sandpaper to bring out the lower layers, or even right up to the print surface to bring out the grayish tint.

 

Cogs are printed in Finland, from plant-based, biodegradable plastic. The product is durable for decorative use, it is not a real durable cog.