EEW 6 lace bobbin for eSpinner

3D printed lace bobbin EEW 6 and 6.1. model

This tube has threads at both ends and counter-threads on the bobbin ends. If you want to attach them permanently, you can carefully apply a couple of drops of glue to the beginning of the thread and screw the roller head into place. Allow to dry until the glue no longer smells; it is then completely dry. Use cyanoacrylate glue, i.e., superglue, to glue PLA.

Both bobbin ends have ball bearings, which are embedded in place after printing.

You can read about Eija's experiences with using a 3D-printed bobbins on her blog: : https://pelkkablogi.wordpress.com/2022/04/18/rullia-rukkiin/

Do not use fishing line or metal string with 3D printed bobbins, as they wear down the plastic. Use cotton string instead.

Rullat tulostetaan tilauksesta, pakkaan tilaukset 1-3 päivän sisällä tilauksesta. Rullat toimitetaan kasaamattomana, tällöin ne mahtuvat kirjeeseen tai pikkupakettiin. Jos haluat rullat kasattuna, otathan yhteyttä!

Tulostuksessa käytettävät tiedostot on tehnyt Maurice Ribble, Dreaming Robotsillta.

If you are interested in other EEW eSpinner printable parts, please contact us by email.